Questions? Call us toll free 1-866-840-4400
Fax (360) 350-6307

Search results for 'magnets for jewelry'

47 Item(s)

per page

Grid  List 

Set Descending Direction
  1. 4x2mm nickel plated rare earth disc magnet

    D0402

    D4x2mm N38 NiCuNi Plated Disc Magnet

    A small magnet good for small woodworking, modeling, sensor, and craft applications. Learn More
  2. C1818

    C1818

    D18 x 18mm N38 Nickel Plated Cylinder Magnet

    This chunky 3/4 inch magnet is a great industrial magnet. With nearly 30 lbs of holding strength and a large field size, this one is perfect for magicians, carpenters, and light industrial applications. This one can definitely pinch. Learn More
  3. D5x1mm N52 Gold Plated Disc Magnet

    D0501G-N52

    D5x1mm N52 Gold Plated Disc Magnet

    5mm diameter x 1mm thick. Magnetized through the 1mm. Quality 24kt Gold plated. Very nice uniform magnets. Strongest Grade N52. Learn More
  4. B0901

    B0901

    9 x 9 x 1.5mm N38 Nickel Plated Block Magnet

    This thin plate magnet is perfect for sewing into light fabrics. The 9x9mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This little magnet can hold up to 6 lbs. Learn More
  5. C0303

    C0303

    D3 x 3mm N38 NiCuNi Plated Cylinder Magnet

    $0.16

    Great crafts and small projects. This one is easy to handle and will not pinch at all. It is not quite strong enough to be a great fridge magnet, but jewelers and woodworkers will find it is a great size and strength for most small jobs. This one can hold about 1/2 lb. Learn More
  6. R2506

    R2506

    D25-12.5x6mm N38 NiCuNi Plated Ring Magnet

    This large ring magnet is roughly the same size as our D2506 disc magnet with a 12.5mm center hole. It can hold a 1/2 inch steel plate with about 20 lbs of force. Learn More
  7. B1212E-N42

    B1212E-N42

    12 x 12 x 12mm N42 NiCuEpoxy Coated Block Magnet

    This medium cube can hold up to 15 lbs. It will take a little effort to separate two of them that are stuck together. Learn More
  8. C0909

    C0909

    D3/8 x 3/8" N38 Nickel Plated Cylinder Magnet

    This 3/8" x 3/8" (.375 x .375) is easy to handle, great for crafting wood working, plastics, office cubicles, and more. It wont pinch your fingers and it can hold around 10 lbs. Learn More
  9. 4x2mm nickel plated rare earth disc magnet

    D0402-N35

    D4x2mm N35 NiCuNi Plated Disc Magnet

    N35 is the weakest NdFeB grade available. The N35 and N50 grades of the 4x2 disc magnet were requested specifically for rubik's cube modifications by magnetic cubing expert DMCubing. Check out his channel for great instructional videos on how to upgrade your cubes with some rare earth magnets! Learn More
  10. 3mm rare earth disc magnet for crafts

    D0301

    D3x1.5mm N38 NiCuNi Plated Disc Magnet

    One of our most popular magnets. This small disc weighs about .08 grams and holds about 114 grams (1/4 lb.) That means it can hold well over a thousand times its own weight. Perfect for art projects, miniature models, or faux jewelry. Learn More
  11. 10x2mm nickel plated rare earth disc magnet

    D1002

    D10x2mm N38 NiCuNi Plated Disc Magnet

    This magnet is a good size for crafts and woodworking. It is small enough that it wont pinch fingers. Commonly used in magnetic badge holders or lapel pins. Holds up to 7lbs. Learn More
  12. CSR1804

    CSR1804

    D18-3.5x4mm N38 NiCuNi Plated Countersunk Ring Magnet

    One of our most popular magnets. The CSR1804 has a countersunk hole sized for a #6 machine or wood screw. This one is easy to securely mount in a variety of mediums. Perfect for latches, lock downs, tools, alignment and more. We keep large quantities in stock. See our CSR1809 for a thicker version. Learn More
  13. 4x Nickel Plated Disc Magnet

    D04015

    D4x1.5mm N38 NiCuNi Plated Disc Magnet

    A small handy magnet. Suitable for crafts, sensors, jewelry, and modeling. Learn More
  14. C0609K

    C0609K

    D6 x 9mm N38 Plastic Coated (Black) Cylinder Magnet

    This small plastic coated magnet is perfect for office organization, magnetic white boards and crafts. Available in seven different colors, it is great for color coding your calendar or organizing documents on your magnetic white board. Since the entire magnet is coated with plastic, these magnet are very durable and will not chip or break from use. Actual dimensions with plastic coating are 7.5mm diameter x 10.0mm thick. Allow +/- 0.1mm. Learn More
  15. MR20

    MR25

    D25-5.5x8mm N38 NiCuNi Plated Countersunk Cup Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  16. tiny gold plated rare earth disc 1.5mm diameter

    D0100G

    D1.5x0.75mm N52 Gold Plated Disc Magnet

    These are the smallest magnets we can produce. Perfect for electronics, diamagnetic levitation, arts and crafts. These magnets are so small that it is very difficult to pick up just one of them. If they come in contact with a larger field, these tiny discs will react quickly and in unpredicatable ways - such as launching ballistically across the room. Learn More
  17. 8x2mm black epoxy coated rare earth magnet (disc)

    D0802E-N42

    D8x2mm N42 NiCuEpoxy Coated Disc Magnet

    Black epoxy coated disc magnet. Holds over 4 lbs. Perfect for woodworking, plastics, etc. Learn More
  18. MR32

    MR32

    D32-5.5x8mm N38 NiCuNi Plated Countersunk Cup Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  19. B120501

    B120501

    12 x 5 x 1.5mm N38 NiCuNi Plated Block Magnet

    This thin rectangular plate magnet is perfect for sewing into light fabrics. The large 5x12mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This one can hold up to 6 lbs. Learn More
  20. C0512

    C0512

    D5 x 12mm N38 NiCuNi Cylinder Magnet - DIAMETRICALLY MAGNETIZED

    This diametrically magnetized magnet was originally designed for the Melexsis MLX90316 Rotary Position Sensor IC. Cylinder magnets are usually magnetized so that the poles are on the ends of the magnet. This piece is setup so that the poles are on the sides of the magnet. This makes the magnets stack up edgewise. The side effect is that this magnet is perfect for magnetic jewelry. See our magnetic bracelet combo pack.

    Learn More
  21. D2503
  22. D4x2mm N42 Gold Plated Disc Magnet

    D0402G

    D4x2mm N42 Gold Plated Disc Magnet

    Small 4x2mm Gold plated disc magnet that is useful for crafts, small woodworking projects, and jewelry. Learn More
  23. MR16

    MR16

    D16-3.5x5mm N38 NiCuNi Plated Countersunk Ring Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  24. 4x1mm nickel plated disc magnet

    D0401

    D4x1mm N38 NiCuNi Plated Disc Magnet

    $0.09

    A small thin rare earth magnet that works great for paper crafts, modeling, figurines, sensors and jewelry Learn More
  25. C0309

    C0309

    D3 x 9mm N38 Nickel Plated Cylinder Magnet

    Great crafts and small projects. This one is easy to handle and will not pinch at all. It is not quite strong enough to be a great fridge magnet, but jewelers and woodworkers will find it is a great size and strength for most small jobs. Learn More
  26. D1203E-N42

    D1203E-N42

    D12x3mm N42 NiCuEpoxy Coated Disc Magnet

    Another handy size. Less than 1/2 inch in diameter and can hold around 14 lbs. Useful for a multitude of applications including LED throwies. Good for woodworking, crafts, and sewing with light denim. This magnet is triple coated with Nickel, Copper and Epoxy for more effective water resistance. Learn More
  27. B2525

    B2525

    25 x 25 x 25mm N38 Nickel Plated Block Magnet

    Do not under estimate the power of this large cube magnet. With a holding capacity of up to 70 lbs, this magnet is definitely not for the un-initiated. This one creates a very deep magnetic field that is perfect for detecting metal studs in the wall, building particle accelerators, or very large halbach arrays for your maglev train. Magnets this large can be dangerous and should always be handled with thick leather gloves. This magnet is very difficult to control and easy to break. It is not recommended for day to day handling and experimentation. The B2525 can hold up to 70 lbs. Learn More
  28. C1212

    C1212

    D12 x 12mm N38 NiCuNi Plated Cylinder Magnet

    Perfect for larger crafts, woodworking, light industrial, and plastics. This is one is also used in our Gauss Gun Combo Pack #12. Learn More
  29. 4x2mm nickel plated rare earth disc magnet

    D0402-N50

    D4x2mm N50 NiCuNi Plated Disc Magnet

    N50 is the second strongest NdFeB grade available, only N52 is stronger. The N35 and N50 grades of the 4x2 disc magnet were requested specifically for rubik's cube modifications by magnetic cubing expert DMCubing. Check out his channel for great instructional videos on how to upgrade your cubes with some rare earth magnets! Learn More
  30. 3x1.5mm black epoxy coated disc magnet

    D03015E-N42

    D3x1.5mm N42 NiCuEpoxy Coated Disc Magnet

    This is the same size as our D0301 and D0301G disc magnets. Learn More
  31. C0103G

    C0103G

    D1 x 3mm N48 Gold Plated Cylinder Magnet

    Tiny cylinder magnet. 1mm diameter and 3mm thick with gold plating in grade N48. Can be custom produced with any plating or material grade. Useful for jewelry, electronics, sensor and craft applications Learn More
  32. CSR1809

    CSR1809

    D18-3.5x9mm N38 NiCuNi Plated Countersunk Ring Magnet

    A thicker version of one of our most popular magnets. The CSR1809 has a countersunk hole sized for a #6 machine or wood screw. This one is easy to securely mount in a variety of mediums. Perfect for latches, lock downs, tools, alignment and more. We keep large quantities in stock. The picture shown is a thinner version of this magnet. The only difference between the two is the thickness. The CSR1809 is more than twice as thick as the one in the picture Learn More
  33. B1212

    B1212

    12 x 12 x 12mm N38 Nickel Plated Block Magnet

    This medium cube can hold up to 15 lbs. It is strong enough to pinch little fingers. This one is a good choice if you are looking for a durable, light duty magnet to have at the office or the home. Learn More
  34. C0625

    C0625

    D6 x 25mm N38 NiCuNi Plated Cylinder Magnet

    This one is easy to handle, great for crafting wood working, plastics, office cubicles, and more. Recently upgraded from N38 to N48 Learn More
  35. 6x1.5mm gold plated magnet with dimple marking pole location

    D06015G-N42DN

    D6x1.5mm N42 Gold Plated Disc Magnet - North Pole Marked

    Perfect for magnetic therapy. A small dimple marks the North Pole. This magnet is used by Return to Health clients. Learn More
  36. small thin rare earth magnet for crafts modeling and sensors

    D0201

    D2x1mm N38 NiCuNi Plated Disc Magnet

    This small and thin magnet is great for paper crafts and modeling. Learn More
  37. thin gold plated rare earth disc magnet

    D0901G

    D9x1mm N35 Gold Plated Disc Magnet

    A thin gold plated magnet in a low grade (N35) material. Great for paper crafts such as embedding into a box or cardboard closure. Learn More
  38. MR42

    MR42

    D42-6.5x9mm N38 NiCuNi Plated Countersunk Cup Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  39. B120601

    B120601

    12 x 6 x 1.5mm N38 NiCuNi Plated Block Magnet

    This thin rectangular plate magnet is perfect for sewing into light fabrics. The large 6x12mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This one can hold up to 6 lbs. Learn More
  40. C0609

    C0609

    D6 x 9mm N38 NiCuNi Plated Cylinder Magnet

    One of our most popular cylinders. This one is easy to handle, great for crafting wood working, plastics, office cubicles, and more. It wont pinch your fingers and it can hold around 2 lbs. Learn More
  41. D2506
  42. Small nickel plated rare earth magnet 6mm plate

    B0601

    6 x 6 x 1.5mm N38 Nickel Plated Block Magnet

    This thin plate magnet is perfect for sewing into light fabrics. The 6x6mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This is our smallest plate magnet available. Learn More
  43. D6x1mm N48 Gold Plated Disc Magnet

    D06010G-N48

    D6x1mm N48 Gold Plated Disc Magnet

    A very high grade magnet for a little extra strength. Good for jewelry and magnetic therapy applications. Learn More
  44. MR20

    MR20

    D20-4.5x7mm N38 NiCuNi Plated Countersunk Cup Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  45. 4x1 gold plated rare earth magnet

    D04010G-N52

    D4x1mm N52 Gold Plated Disc Magnet

    A small N52 grade gold plated magnet good for jewelry, crafts and magnetic therapy applications. Learn More
  46. C0318

    C0318

    D3 x 18mm N38H NiCuNi Plated Cylinder Magnet

    Great crafts and small projects. This one is easy to handle and will not pinch at all. It is not quite strong enough to be a great fridge magnet, but jewelers and woodworkers will find it is a great size and strength for most small jobs. Learn More
  47. D1206

    D1206

    D12x6mm N38 NiCuNi Plated Disc Magnet

    Less than 1/2 inch in diameter and can hold around 10 lbs. Useful for craft or industrial applications. Learn More

47 Item(s)

per page

Grid  List 

Set Descending Direction