Questions? Call us toll free 1-866-840-4400
Fax (360) 350-6307

Search results for '5mm'

40 Item(s)

per page

Grid  List 

Set Descending Direction
  1. 4x Nickel Plated Disc Magnet

    D04015

    D4x1.5mm N38 NiCuNi Plated Disc Magnet

    A small handy magnet. Suitable for crafts, sensors, jewelry, and modeling. Learn More
  2. CSR1804

    CSR1804

    D18-3.5x4mm N38 NiCuNi Plated Countersunk Ring Magnet

    One of our most popular magnets. The CSR1804 has a countersunk hole sized for a #6 machine or wood screw. This one is easy to securely mount in a variety of mediums. Perfect for latches, lock downs, tools, alignment and more. We keep large quantities in stock. See our CSR1809 for a thicker version. Learn More
  3. 1.5 x 1.5 x 0.75mm N38 Nickel Plated Block Magnet

    B015075

    1.5 x 1.5 x 0.75mm N38 Nickel Plated Block Magnet

    An extremely tiny square magnet. Approximately 1/16th of an inch wide by 1/32" thick. The poles are located on the 1.5 x 1.5mm surfaces. Learn More
  4. C0625

    C0625

    D6 x 25mm N38 NiCuNi Plated Cylinder Magnet

    This one is easy to handle, great for crafting wood working, plastics, office cubicles, and more. Recently upgraded from N38 to N48 Learn More
  5. D1506

    D1506

    D15x6mm N38 Nickel Plated Disc Magnet

    15mm dia. x 6mm thick Neodymium Disc Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 6mm thickness Learn More
  6. B120501

    B120501

    12 x 5 x 1.5mm N38 NiCuNi Plated Block Magnet

    This thin rectangular plate magnet is perfect for sewing into light fabrics. The large 5x12mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This one can hold up to 6 lbs. Learn More
  7. R1803

    R1803

    D18-6.5x3mm N38 Nickel Plated Ring Magnet

    $1.08

    This medium sized ring is the same size as our D1803 disc magnet with a 6.5mm center hole. It is also similar in size to our CSR1804, but slightly thinner. Learn More
  8. /

    D05010-N42

    D5x1mm N42 Nickel Plated Disc Magnet

    $0.11

    5mm diameter x 1mm thick. Magnetized through the 1mm. Nickel+Copper+Nickel plated. Medium grade N42. Learn More
  9. C0512

    C0512

    D5 x 12mm N38 NiCuNi Cylinder Magnet - DIAMETRICALLY MAGNETIZED

    This diametrically magnetized magnet was originally designed for the Melexsis MLX90316 Rotary Position Sensor IC. Cylinder magnets are usually magnetized so that the poles are on the ends of the magnet. This piece is setup so that the poles are on the sides of the magnet. This makes the magnets stack up edgewise. The side effect is that this magnet is perfect for magnetic jewelry. See our magnetic bracelet combo pack.

    Learn More
  10. R3712

    R3712

    D37-6.5x12mm N38 Nickel Plated Ring Magnet

    37mm dia. x 6.5mm inner dia. x 12mm thick Neodymium Ring Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 12mm thickness Learn More
  11. 3x1.5mm black epoxy coated disc magnet

    D03015E-N42

    D3x1.5mm N42 NiCuEpoxy Coated Disc Magnet

    This is the same size as our D0301 and D0301G disc magnets. Learn More
  12. R0602

    R0602

    D6-3.5x2mm N38 NiCuNi Plated Ring Magnet

    $0.14

    This small ring is similar to our D0602 and our R0606. It fits around a smaller cylinder magnet to create some interesting effects. This magnet is easy to handle, and holds about 1/4 lb. Learn More
  13. 3mm rare earth disc magnet for crafts

    D03015-N52

    D3x1.5mm N52 NiCuNi Plated Disc Magnet

    $0.11

    One of our most popular Sizes. Learn More
  14. B5012

    B5012

    50 x 25 x 12mm N38 Nickel Plated Block Magnet

    50mm long x 25mm wide x 12mm thick Neodymium Block Magnet - NdFeB N38 - Nickel Plated - Magnetized through 12mm thickness Learn More
  15. CSR2505

    CSR2505

    D25-4x5mm N38 NiCuNi Plated Countersunk Ring Magnet

    25mm dia. x 4mm inner dia. x 5mm thick (with 8mm dia. x 3mm deep countersink) Neodymium Countersunk Ring magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 5mm thickness Learn More
  16. tiny gold plated rare earth disc 1.5mm diameter

    D0100G

    D1.5x0.75mm N52 Gold Plated Disc Magnet

    These are the smallest magnets we can produce. Perfect for electronics, diamagnetic levitation, arts and crafts. These magnets are so small that it is very difficult to pick up just one of them. If they come in contact with a larger field, these tiny discs will react quickly and in unpredicatable ways - such as launching ballistically across the room. Learn More
  17. MR16

    MR16

    D16-3.5x5mm N38 NiCuNi Plated Countersunk Ring Magnet

    This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More
  18. D2512

    D2512

    D25x12mm N38 NiCuNi Plated Disc Magnet

    25mm dia. x 12mm thick Neodymium Disc Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 12mm thickness Learn More
  19. B1201

    B1201

    12 x 12 x 1.5mm N38 Nickel Plated Block Magnet

    $0.45

    This is a thin plate magnet that can be sewn into light fabrics. The large surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This magnet can hold up to 12 lbs. Learn More
  20. CSR1809

    CSR1809

    D18-3.5x9mm N38 NiCuNi Plated Countersunk Ring Magnet

    A thicker version of one of our most popular magnets. The CSR1809 has a countersunk hole sized for a #6 machine or wood screw. This one is easy to securely mount in a variety of mediums. Perfect for latches, lock downs, tools, alignment and more. We keep large quantities in stock. The picture shown is a thinner version of this magnet. The only difference between the two is the thickness. The CSR1809 is more than twice as thick as the one in the picture Learn More
  21. 3 x 3 x 1.5mm N38 Nickel Plated Block Magnet

    B0303015

    3 x 3 x 1.5mm N38 Nickel Plated Block Magnet

    $0.08

    An extremely tiny square magnet. Approximately 1/8" wide by 1/16" thick. The poles are located on the 3 x 3mm surfaces. Learn More
  22. C0909

    C0909

    D3/8 x 3/8" N38 Nickel Plated Cylinder Magnet

    This 3/8" x 3/8" (.375 x .375) is easy to handle, great for crafting wood working, plastics, office cubicles, and more. It wont pinch your fingers and it can hold around 10 lbs. Learn More
  23. D2503
  24. B120601

    B120601

    12 x 6 x 1.5mm N38 NiCuNi Plated Block Magnet

    This thin rectangular plate magnet is perfect for sewing into light fabrics. The large 6x12mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This one can hold up to 6 lbs. Learn More
  25. R1803U

    R1803U

    D18-6.5x3mm N38 No Plating Ring Magnet

    18mm dia. x 6.5mm inner dia. x 3mm thick Neodymium Ring Magnet - NdFeB N38 - Un-Plated - Axially Magnetized through 3mm thickness Learn More
  26. C0609K

    C0609K

    D6 x 9mm N38 Plastic Coated (Black) Cylinder Magnet

    This small plastic coated magnet is perfect for office organization, magnetic white boards and crafts. Available in seven different colors, it is great for color coding your calendar or organizing documents on your magnetic white board. Since the entire magnet is coated with plastic, these magnet are very durable and will not chip or break from use. Actual dimensions with plastic coating are 7.5mm diameter x 10.0mm thick. Allow +/- 0.1mm. Learn More
  27. D1502

    D1502

    D15x2mm N38 NiCuNi Plated Disc Magnet

    $0.60

    15mm dia. x 2mm thick Neodymium Disc Magnet - NdFeB N38 - NiCuNi Plated - Axially Magnetized through 2mm thickness Learn More
  28. B0901

    B0901

    9 x 9 x 1.5mm N38 Nickel Plated Block Magnet

    This thin plate magnet is perfect for sewing into light fabrics. The 9x9mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This little magnet can hold up to 6 lbs. Learn More
  29. R1203

    R1203

    D12-3.5x3mm N38 NiCuNi Plated Ring Magnet

    This medium sized ring magnet. This one works well with our C0309 to make a cool miniature gauss gun. This rings is also the same size as our D1203, with ad 3.5mm center hole. It can hold about 10 lbs. Learn More
  30. D5x1mm N52 Gold Plated Disc Magnet

    D0501G-N52

    D5x1mm N52 Gold Plated Disc Magnet

    5mm diameter x 1mm thick. Magnetized through the 1mm. Quality 24kt Gold plated. Very nice uniform magnets. Strongest Grade N52. Learn More
  31. strong gold plated rare earth magnet with dimple marking North pole

    D095015G-N45

    D9.5x1.5mm N45 Gold Plated Disc Magnet

    A strong medium sized disc magnet with gold plating and a dimple marking the North pole. Learn More
  32. CSR2506

    CSR2506

    D25-4x6mm N38 NiCuNi Plated Countersunk Ring Magnet

    25mm dia. x 4mm inner dia. x 6mm thick (with 8mm dia. x 3mm deep countersink) Neodymium Countersunk Ring Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 6mm thickness Learn More
  33. 3mm rare earth disc magnet for crafts

    D0301

    D3x1.5mm N38 NiCuNi Plated Disc Magnet

    One of our most popular magnets. This small disc weighs about .08 grams and holds about 114 grams (1/4 lb.) That means it can hold well over a thousand times its own weight. Perfect for art projects, miniature models, or faux jewelry. Learn More
  34. MH25

    MH25

    25mm Hook Magnet - N38 - NiCuNi Plated

    25mm Hook Magnet, NdFeB Grade N38, Nickel Plated Learn More
  35. 6x1.5mm gold plated magnet with dimple marking pole location

    D06015G-N42DN

    D6x1.5mm N42 Gold Plated Disc Magnet - North Pole Marked

    Perfect for magnetic therapy. A small dimple marks the North Pole. This magnet is used by Return to Health clients. Learn More
  36. B2525

    B2525

    25 x 25 x 25mm N38 Nickel Plated Block Magnet

    Do not under estimate the power of this large cube magnet. With a holding capacity of up to 70 lbs, this magnet is definitely not for the un-initiated. This one creates a very deep magnetic field that is perfect for detecting metal studs in the wall, building particle accelerators, or very large halbach arrays for your maglev train. Magnets this large can be dangerous and should always be handled with thick leather gloves. This magnet is very difficult to control and easy to break. It is not recommended for day to day handling and experimentation. The B2525 can hold up to 70 lbs. Learn More
  37. R2506

    R2506

    D25-12.5x6mm N38 NiCuNi Plated Ring Magnet

    This large ring magnet is roughly the same size as our D2506 disc magnet with a 12.5mm center hole. It can hold a 1/2 inch steel plate with about 20 lbs of force. Learn More
  38. Small nickel plated rare earth magnet 6mm plate

    B0601

    6 x 6 x 1.5mm N38 Nickel Plated Block Magnet

    This thin plate magnet is perfect for sewing into light fabrics. The 6x6mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This is our smallest plate magnet available. Learn More
  39. C1225

    C1225

    D12 x 25mm N38 NiCuNi Plated Cylinder Magnet

    A good sized cylinder magnet that is a little bit less than 1/2 inch in diameter x 1 inch long. Like all cylinders, this one is best used when you need a deep magnetic field and not merely holding power. Learn More
  40. D2506

40 Item(s)

per page

Grid  List 

Set Descending Direction