Search results for '1.5mm x 6mm gold disc'

Tiny cylinder magnet. 1mm diameter and 3mm thick with gold plating in grade N48. Can be custom produced with any plating or material grade. Useful for jewelry, electronics, sensor and craft applications Learn More

This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More

37mm dia. x 6.5mm inner dia. x 12mm thick Neodymium Ring Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 12mm thickness Learn More

N50 is the second strongest NdFeB grade available, only N52 is stronger. The N35 and N50 grades of the 4x2 disc magnet were requested specifically for rubik's cube modifications by magnetic cubing expert DMCubing. Check out his channel for great instructional videos on how to upgrade your cubes with some rare earth magnets! Learn More

These are the smallest magnets we can produce. Perfect for electronics, diamagnetic levitation, arts and crafts. These magnets are so small that it is very difficult to pick up just one of them. If they come in contact with a larger field, these tiny discs will react quickly and in unpredicatable ways - such as launching ballistically across the room. Learn More

A small magnet good for small woodworking, modeling, sensor, and craft applications. Learn More

9mm dia. Neodymium Sphere Magnet - NdFeB N38 - Nickel Plated - Magnetized through 9mm diameter Learn More

One of our most popular cylinders. This one is easy to handle, great for crafting wood working, plastics, office cubicles, and more. It wont pinch your fingers and it can hold around 2 lbs. Learn More

This small ring magnet is easy to handle and does not pinch fingers. It is shaped like a tube with its poles located on the ends with the holes. Learn More

This is also the Disk #08 mentioned on the audiworld forums for the detachable license plate kit.
Learn More

A small N52 grade gold plated magnet good for jewelry, crafts and magnetic therapy applications. Learn More

This magnet is a good size for crafts and woodworking. It is small enough that it wont pinch fingers. Commonly used in magnetic badge holders or lapel pins. Holds up to 7lbs. Learn More

This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More

25mm dia. x 4mm inner dia. x 5mm thick (with 8mm dia. x 3mm deep countersink) Neodymium Countersunk Ring magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 5mm thickness Learn More

One of our most popular Sizes. Learn More

An extremely tiny square magnet. Approximately 1/8" wide by 1/16" thick. The poles are located on the 3 x 3mm surfaces. Learn More

This magnet is approximately 3/4 inch cube. Learn More

3mm dia. Neodymium Sphere Magnet - NdFeB N38 - Nickel Plated - Magnetized through 3mm diameter Learn More

This diametrically magnetized magnet was originally designed for the Melexsis MLX90316 Rotary Position Sensor IC. Cylinder magnets are usually magnetized so that the poles are on the ends of the magnet. This piece is setup so that the poles are on the sides of the magnet. This makes the magnets stack up edgewise. The side effect is that this magnet is perfect for magnetic jewelry. See our magnetic bracelet combo pack.

Learn More

32mm Hook Magnet, NdFeB Grade N38, Nickel Plated Learn More

18mm dia. x 3mm thick Neodymium Disc Magnet - NdFeB N38 - NiCuNi Plated - Axially Magnetized through 3mm thickness Learn More

This thin plate magnet is perfect for sewing into light fabrics. The 9x9mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This little magnet can hold up to 6 lbs. Learn More

A strong medium sized disc magnet with gold plating and a dimple marking the North pole. Learn More

A good sized cylinder magnet that is a little bit less than 1/2 inch in diameter x 1 inch long. Like all cylinders, this one is best used when you need a deep magnetic field and not merely holding power. Learn More

A thicker version of one of our most popular magnets. The CSR1809 has a countersunk hole sized for a #6 machine or wood screw. This one is easy to securely mount in a variety of mediums. Perfect for latches, lock downs, tools, alignment and more. We keep large quantities in stock. The picture shown is a thinner version of this magnet. The only difference between the two is the thickness. The CSR1809 is more than twice as thick as the one in the picture Learn More

This is a very useful style of magnet. The magnet is set inside of a protective steel cup. The assembly has a countersunk center hole that is perfect for mounting with a screw or bolt. The steel cup serves several purposes. Besides protecting the magnet, the cup will also focus the magnetic field to the front of the assembly. Learn More