Search results for '6mm block'

A very high grade magnet for a little extra strength. Good for jewelry and magnetic therapy applications. Learn More

This is also the Disk #12 mentioned on the audiworld forums for the detachable license plate kit.
Learn More

This small ring is similar to our D0602 and our R0606. It fits around a smaller cylinder magnet to create some interesting effects. This magnet is easy to handle, and holds about 1/4 lb. Learn More

This thin plate magnet is perfect for sewing into light fabrics. The 9x9mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This little magnet can hold up to 6 lbs. Learn More

Do not under estimate the power of this large cube magnet. With a holding capacity of up to 70 lbs, this magnet is definitely not for the un-initiated. This one creates a very deep magnetic field that is perfect for detecting metal studs in the wall, building particle accelerators, or very large halbach arrays for your maglev train. Magnets this large can be dangerous and should always be handled with thick leather gloves. This magnet is very difficult to control and easy to break. It is not recommended for day to day handling and experimentation. The B2525 can hold up to 70 lbs. Learn More

15mm dia. x 6mm thick Neodymium Disc Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 6mm thickness Learn More

This one is easy to handle, great for crafting wood working, plastics, office cubicles, and more. Recently upgraded from N38 to N48 Learn More

This thin plate magnet is perfect for sewing into light fabrics. The 6x6mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This is our smallest plate magnet available. Learn More

25mm dia. x 4mm inner dia. x 6mm thick (with 8mm dia. x 3mm deep countersink) Neodymium Countersunk Ring Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 6mm thickness Learn More

This medium cube can hold up to 15 lbs. It will take a little effort to separate two of them that are stuck together. Learn More

One of our most popular cylinders. This one is easy to handle, great for crafting wood working, plastics, office cubicles, and more. It wont pinch your fingers and it can hold around 2 lbs. Learn More

Perfect for magnetic therapy. A small dimple marks the North Pole. This magnet is used by Return to Health clients. Learn More

An extremely tiny square magnet. Approximately 1/16th of an inch wide by 1/32" thick. The poles are located on the 1.5 x 1.5mm surfaces. Learn More

A thicker version of one of our most popular magnets. The CSR1809 has a countersunk hole sized for a #6 machine or wood screw. This one is easy to securely mount in a variety of mediums. Perfect for latches, lock downs, tools, alignment and more. We keep large quantities in stock. The picture shown is a thinner version of this magnet. The only difference between the two is the thickness. The CSR1809 is more than twice as thick as the one in the picture Learn More

This is a thin plate magnet that can be sewn into light fabrics. The large surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This magnet can hold up to 12 lbs. Learn More

6mm dia. Neodymium Sphere Magnet - NdFeB N38 - Nickel Plated - Magnetized through 6mm diameter Learn More

These discs are protected by a thick plastic coating. They work very well in salt water and other harsh environments. The picture to the left is a similar but not identical magnet. It will be updated asap. Learn More

This small ring magnet is easy to handle and does not pinch fingers. It is shaped like a tube with its poles located on the ends with the holes. Learn More

This thin rectangular plate magnet is perfect for sewing into light fabrics. The large 5x12mm surface area gives plenty of holding strength, but the thin profile ensures that the field does not extend too far. This one can hold up to 6 lbs. Learn More

50mm long x 25mm wide x 12mm thick Neodymium Block Magnet - NdFeB N38 - Nickel Plated - Magnetized through 12mm thickness Learn More

18mm dia. x 6mm thick Neodymium Disc Magnet - NdFeB N38 - Nickel Plated - Axially Magnetized through 6mm thickness Learn More

16mm Hook Magnet, N38, Nickel Plated Learn More

This small cube magnet is another good all purpose size. It is a shade less than 1/4" and can hold up to 3 lbs. The poles are on opposite sides of the cube. Learn More

This magnet is approximately 3/4 inch cube. Learn More

Less than 1/2 inch in diameter and can hold around 10 lbs. Useful for craft or industrial applications. Learn More

This small plastic coated magnet is perfect for office organization, magnetic white boards and crafts. Available in seven different colors, it is great for color coding your calendar or organizing documents on your magnetic white board. Since the entire magnet is coated with plastic, these magnet are very durable and will not chip or break from use. Actual dimensions with plastic coating are 7.5mm diameter x 10.0mm thick. Allow +/- 0.1mm. Learn More

An extremely tiny square magnet. Approximately 1/8" wide by 1/16" thick. The poles are located on the 3 x 3mm surfaces. Learn More

This large ring magnet is roughly the same size as our D2506 disc magnet with a 12.5mm center hole. It can hold a 1/2 inch steel plate with about 20 lbs of force. Learn More

This medium cube can hold up to 15 lbs. It is strong enough to pinch little fingers. This one is a good choice if you are looking for a durable, light duty magnet to have at the office or the home. Learn More

Another extremely useful magnet. This one is about 1/4" x 1/4" and can hold up to 1.5 lbs. Use this one in small woodworking and plastics projects. Learn More

This small ring magnet is easy to handle and does not pinch fingers. It is shaped like a tube with its poles located on opposite edges of the ring. It is the same size as our R0906 but is diametrically magnetized. Learn More

One of our most popular magnets. The CSR1804 has a countersunk hole sized for a #6 machine or wood screw. This one is easy to securely mount in a variety of mediums. Perfect for latches, lock downs, tools, alignment and more. We keep large quantities in stock. See our CSR1809 for a thicker version. Learn More